2019 Arctic Cat ZR 6000 Limited ES 137

Features

• NEXT-GEN BODY PANELS: Arctic Cat’s Next-Gen body panels are designed to seamlessly cut through the air with as little atmospheric tension as possible. With only a quarter-turn of the two quick-release tabs, the side panel comes off and provides easy access to the engine compartment for general maintenance.
• 6000 C-TEC2 ENGINE WITH DSI: This 599 cc 2-stroke DSI is the unmodified version of the engine that’s been launching Team Arctic down the racetrack since 2012. This quick-revving, 125-class horsepower C-TEC2™ power mill is the product of a world-class engine assembly plant — ours. Whether you’re riding a ZR® an M or a Crossover, the 6000 is one of the most satisfying engines found in a snowmobile.
• ARCTIC DRIVE SYSTEM: The Arctic Drive System features CVT drive and driven clutches for a combination of smooth shifting, optimal performance, maximum durability; great serviceability; and reduced weight. The new drive clutch features a roller bearing on the shaft that enables an auto-adjusting belt tension design and delivers consistent performance without manual adjustments. It also features a 12.5 percent lower effective starting ratio (while maintaining the top ratio) for smoother engagement and reduced belt wear at drive-away speed, with more evenly distributed force for lower belt pressure. It’s a design that’s unique to Arctic Cat.
• ARCTIC RACE FRONT SUSPENSION WITH FOX 1.5 ZERO QS3 SHOCKS: The Arctic Race front suspension’s geometry was developed through racing. Our unique wide A-arm spacing complements the chassis design, which allows us to maintain a tighter suspension. The FOX® QS3 shock lets you adjust your shocks to suit the riding conditions without removing your gloves. Set the clicker to 1 for a smooth, comfortable ride like the LXR. Click it up a notch to setting 2, and you’ll straighten out the corners like a Sno Pro. Or click up to 3 to go head to head with an RR. These shocks feature a premium coil-over design with forged aluminum reservoir.
• SLIDE-ACTION REAR SUSPENSION WITH ARCTIC CAT IFP 1.5 FRONT AND FOX 2.0 ZERO QS3 REAR SHOCKS: The SLIDE-ACTION rear suspension brings race-day technology to everyday riding. Our U-shaped slot fits over a fixed shaft to allow a crucial half-inch of sliding movement. As the rear transfer blocks are engaged, the free-acting front arm follows the terrain, keeping your skis firmly planted over bumps, and during aggressive cornering and acceleration. The Arctic Cat IFP 1.5 front gas shocks feature a hard-anodized aluminum body, 0.5 in. shaft, aluminum internal floating piston, and high-quality seals and ice scrapers. FOX 2.0 ZERO QS3 rear tracks feature 3-position dial compression adjustability for quick and easy tuning for different right styles and conditions.
• DELUXE DIGITAL GAUGE: This dual configurable LCD screen gauge allows to you check all the vital information about your snowmobile and more. 14 different readings to be exact. There’s an odometer, speedometer, max RPM, 2 trip meters, engine hours, low oil light, coolant temperature, exhaust temperature, intake air temperature, battery voltage, fuel level, clock and reverse indicator.
• GOGGLE HOLDER: Warm, dry goggles are as near as our goggle holder. The heat from the engine dries your goggles as you ride. Also works for masks and gloves.
• TUNNEL FLARE: Snow belongs on the ground, not on your back. Our tunnel flares are just the things to keep wet snow spray from landing on you.
• 12V OUTLET: Need to charge your phone or another electrical device? We’ve got you covered. Just plug in and power up while you ride.
• THREE-WHEEL REAR AXLE SYSTEM: Three-wheel rear axle system features lightweight 7.12-in. wheels (on 129-in. track models) and 8.0-in. wheels (on 137-in. track models) for more consistent performance and better stability. New 5.5-in. side idler wheels complement it.
• 129-IN. RIPSAW & 137-IN. RIPSAW II TRACK WITH 1.25-IN. LUGS: Just say the name Ripsaw™ and one of the best trail tracks out there comes to mind. The 15 in. wide footprint with 1.25 in. lugs provide excellent durability and traction on groomed or hard-pack snow. Standard Ripsaw is available in 129 in. or the Ripsaw II is available in 137 in.
• LED WITH ACCENT LIGHT: Features LED headlights for enhanced lighting performance. Want the high beams on? The low beam will also stay on to give you a nice, wide light pattern with excellent distance. Plus, special LED accent lighting comes on when you turn the key.
• PUSH BUTTON START: This is just the thing for consistent, reliable starting. A simple push of a button is all you need to get up and running.
• STEALTH LIGHTWEIGHT MASTER CYLINDER BRAKE SYSTEM: New for 2019, the Stealth lightweight master cylinder brake system features a new lever design for increased braking power with less required force compared to the previous design.
• PROCROSS - 6 SKIS: This trail ski’s 6 in. width delivers excellent handling on hardpack snow and good flotation in loose snow. A stiff, deep keel provides positive cornering in all conditions.
• 11 IN. MID-HEIGHT WINDSHIELD: The perfect mix of protection and comfort, keeping any spray from slowing you down when the going gets really fast.